"Daniel" <nospampls2002@[EMAIL PROTECTED]
> wrote in message
news:b2c28803-cece-4b42-861c-f13c3a3953a7@[EMAIL PROTECTED]
> Pszemol wrote:
>> Passenger side half shaft, the longer one, has a bearing.
>> The bearing is secured in the bearing mount with a snap ring.
>> On the bottom side of the bearing mount there is a bolt,
>> maybe 15mm hex head and 1/2 maybe 3/8 long, which
>> screws up into the bearing mount, but it is too short to touch
>> it the bearing itself.
> ========
> That bolt has a rubber tip.
> The factory manual calls it a "non re usable part" so it is to be
> replaced each time.
> The rubber tip gets left behind when the bolt is removed.
> You can push it out, then install the new bolt, which will keep the
> bearing shell from turning.
> Just use a new Toyota supplied bolt and you'll be fine.
Do you know the part number for this special bolt?
The guy at the parts counter at my local dealer****p could not find it for
some reason on his computer...
|
