Re: Back, where did everyone go?

Hey, yer server is down!!

No joy!

cadunkle wrote:
> NoTop442 wrote:
>> On May 30, 10:15 pm, "cadunkle" <cdn...@[EMAIL PROTECTED]
> wrote:
>>> Been a while since I've posted here. I finally have a big block in
>>> my '68 Galaxie. Got some good 460 power. Basically a stock build
>>> with many hours of ****ting into the D3VE heads and a Holley 750
>>> slapped on top. Ssure runs nice!
>>>
>>> So yeah, where did everyone go? Is there another group or is usenet
>>> just dead?
>>>
>>>     Cory
>>>
>>
>> Sounds sweet. Maybe you could send us some pics and info. Looking to
>> get more Fords on the site.
>>
>> NoTop442
>>
>
> Sure, the pics are somewhat old (2 months or so from when I put it
> in) but are located at:
> http://cadunkle.kicks-ass.net/pics/Galaxie/460/Install/real/
>
> I've nicened things up a bit since then, but you can get the basic
> idea from those pics. I'll take some more in the next day or two when
> the weather clears up. Motor is basically put in with a set of FE
> frame mounts in place of the 302 frame mounts. Elongated/notched the
> holes to accomodate the wider 460 block mount location. Used modified
> FE motor mounts (just drill an extra hole adn it bolts to the 460
> block). Trans crossmember turned around and moved back on the stock
> frame mounts for it, then used some long threaded nuts to space it to
> the Lincoln mount. Shortened driveshaft. Put a 9 inch rear under it
> too.
>
> Things to do... Bend new steel fuel line from fuel pump to carb, make
> something to keep trans mount more solid, find kickdown lever and rod
> for C6, fix ****ft linkage to line up with ****fter (got an adjustable
> ****ft rod at Carlisle from maybe an Torino, and my TCI universal
> ****ft lever arrived while I was gone), clean and paint brake backing
> plates (ran out of paint and just threw it together with those
> dirty). I think that's about it... Well, other than getting a manual
> trans (I have clutch pedal setup). The C6 will work for now though.
>
>     Cory