Re: Back, where did everyone go?

NoTop442 wrote:
> On Jun 4, 9:58 am, "cadunkle" <cdn...@[EMAIL PROTECTED]
> wrote:
>> NoTop442 wrote:
>>> On May 30, 10:15 pm, "cadunkle" <cdn...@[EMAIL PROTECTED]
> wrote:
>>>> Been a while since I've posted here. I finally have a big block in
>>>> my '68 Galaxie. Got some good 460 power. Basically a stock build
>>>> with many hours of ****ting into the D3VE heads and a Holley 750
>>>> slapped on top. Ssure runs nice!
>>
>>>> So yeah, where did everyone go? Is there another group or is usenet
>>>> just dead?
>>
>>>>     Cory
>>
>>> Sounds sweet. Maybe you could send us some pics and info. Looking to
>>> get more Fords on the site.
>>
>>> NoTop442
>>
>> Sure, the pics are somewhat old (2 months or so from when I put it
>> in) but
>> are located
>> at:http://cadunkle.kicks-ass.net/pics/Galaxie/460/Install/real/
>>
>> I've nicened things up a bit since then, but you can get the basic
>> idea from those pics. I'll take some more in the next day or two
>> when the weather
>> clears up. Motor is basically put in with a set of FE frame mounts
>> in place
>> of the 302 frame mounts. Elongated/notched the holes to accomodate
>> the wider 460 block mount location. Used modified FE motor mounts
>> (just drill an extra hole adn it bolts to the 460 block). Trans
>> crossmember turned around and
>> moved back on the stock frame mounts for it, then used some long
>> threaded
>> nuts to space it to the Lincoln mount. Shortened driveshaft. Put a 9
>> inch
>> rear under it too.
>>
>> Things to do... Bend new steel fuel line from fuel pump to carb, make
>> something to keep trans mount more solid, find kickdown lever and
>> rod for
>> C6, fix ****ft linkage to line up with ****fter (got an adjustable
>> ****ft rod
>> at Carlisle from maybe an Torino, and my TCI universal ****ft lever
>> arrived while I was gone), clean and paint brake backing plates (ran
>> out of paint
>> and just threw it together with those dirty). I think that's about
>> it...
>> Well, other than getting a manual trans (I have clutch pedal setup).
>> The C6 will work for now though.
>>
>>     Cory
>>
>> --
>> Posted via a free Usenet account fromhttp://www.teranews.com-
Hide
>> quoted text -
>>
>> - Show quoted text -
>
> Dang. Would really like to see those pics. Hope your back on line
> soon.

Seems like it's working, just doesn't wanna work when you click the link
(at 
least from ym newsreader). I had to copy and past the link to get it to 
work. You could also just try http://cadunkle.kicks-ass.net/pics
and 
navigate from there. 



-- 
Posted via a free Usenet account from http://www.teranews.com