by "Bryan" <bryan.swadenerNOSPAM@[EMAIL PROTECTED]
>
Jul 23, 2007 at 07:04 PM
John Kunke wrote:
>
> Tranch wrote:
> >
> >
> > I know I've asked this before but I can't find where I put the answer.
> > I'm rewiring my 64 300 with a Painless Wiring Harness. If I put in an
MSD
> > Ignition System do I still need the ceramic resistor?
>
> No, but because of the way the ignition switch functions you have to
splice
> the two connectors on the ballast together when eliminating the ballast.
....otherwise, you'll have ignition only when cranking or running (but not
both).
Bryan
