should be a 'sandwich nut" behind the dash I think? the nut and bezel
actually "sandwich " the dash between them and hold the switch in. I'm
running from memory on another vehicle though so I could be way off.
"tranch" <ItsMe@[EMAIL PROTECTED]
> wrote in message
news:TPSdnUcHNdh5ODjbnZ2dnUVZ_jKdnZ2d@[EMAIL PROTECTED]
>
> What holds the ignition switch in the dash, 64 300, other than the
> screw on bezel? I put the trim piece on the dash, push the ignition
switch
> thru and screw on the bezel, but the switch wobbles around and does not
> tighten. Was there something that goes behind the dash, a clip or
> something, that holds it tight to the dash?
>
|
