Yeah I thought that might be what it was too. I would have put the nut
back on the switch, or SHOULD have when I took it apart. It's been so
darned
long since I took the dash apart though I just can't remember! I did take
pictures of "almost" everything when I was taking it apart, but wouldn't
you
know it that just happens to be one of the things I missed!
"rob" <me@[EMAIL PROTECTED]
> wrote in message
news:46a5ce51$0$31220$4c368faf@[EMAIL PROTECTED]
> should be a 'sandwich nut" behind the dash I think? the nut and bezel
> actually "sandwich " the dash between them and hold the switch in. I'm
> running from memory on another vehicle though so I could be way off.
>
>
>
>
>
>
> "tranch" <ItsMe@[EMAIL PROTECTED]
> wrote in message
> news:TPSdnUcHNdh5ODjbnZ2dnUVZ_jKdnZ2d@[EMAIL PROTECTED]
>>
>> What holds the ignition switch in the dash, 64 300, other than the
>> screw on bezel? I put the trim piece on the dash, push the ignition
>> switch thru and screw on the bezel, but the switch wobbles around and
>> does not tighten. Was there something that goes behind the dash, a clip
>> or something, that holds it tight to the dash?
>>
>
>
|
