by Stan Weiss <srweiss@[EMAIL PROTECTED]
>
Oct 13, 2007 at 05:24 PM
Julian wrote:
>
>
> The heads will almost certainly be aluminium. I haven't decided on the
cam
> yet, I need more advise here, but basically a street cam that keeps good
low
> down torque, but hotter than stock.
>
> Julian.
Generally aluminum heads will let you run 1/2 to 3/4 of a point more CR
than iron heads. Once you decide on a cam check what dynamic CR and
cranking pressure it will yield. Also check what squish /quench
clearance works best with you combination.
Stan
