by "rick505" <lott1954@[EMAIL PROTECTED]
>
Feb 5, 2007 at 12:21 PM
when you have the car started you hafto put your foot on the brake to
release a park pin.. put your foot on the brake you should hear a click
take your foot off the brake and u should hear a click again when it is in
park and every time u touch the brake peddle you should here a click when
it is in park only. if u dont here that then it is rusty or sticking.you
said it started when it got cold then it is most likely sticking if it is
a floor mounted ****fter take the screws out take the cover off and the
unit should be right there spray a little zep45 or wd40 or some other
spray on it. hope this helps
