S. A wrote:
> My '93 Cherokee S****t drivers side turn signal started fla****ng
extremely
> fast all of a sudden. The passenger signal flashes correctly. A few
times
> after
> starting the Jeep the drivers signal that flashed fast would just stay
on
> permanent when used, then on next restart would flash fast again. I've
> changed the flasher unit (2 tab unit) and still same problem. All bulbs
> (brake & turn sig. headlight) working correctly (inside & out) and same
> brightness.
>
> Also... oil pressure gauge is acting up, needle pegs when accelerating
and
> fluctuates when driving. Haven't replaced sender yet, I assume this is
> probably the problem?
>
> Any idea's where to look or fix for turn sig ?
>
> Thanks S.A
>
>
>
>
The fast blink means a bulb has a bad connection (not enough power) or
one is out.
The oil sender connection sounds loose.
If they are both connected, then I would look to the body ground strap.
There should be a mesh cable running from the engine head to the
firewall. These rot out causing lots of strange things to happen.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
'New' frame in the works for '08. Some Canadian Bush Trip and Build
Photos: http://mikeromainjeeptrips.shutterfly.com
|
