Re: How To Keep Water Pump Pulley from Turning When Tightening Bolts? 95 XJ
by Will Honea <whonea@[EMAIL PROTECTED]
>
Apr 29, 2008 at 10:11 PM
Riles wrote:
> Hi All,
> Apologies for the dumb question, but how do I keep the Water Pump pulley
> from turning when I tighten the bolts? The pulley has two holes in the
> front "face". Thanks In Advance!
> -Riles
Snug the bolts as best you can (an air rachet works nicely and the 1/4"
jobs
top out at under 10 lbs. torque so you won't snap anything). Put the belt
on the pulley, grab it and squeeze it around the pulley while you tighten
the bolts. Treat the belt like a strap wrench.
--
Will Honea
** Posted from http://www.teranews.com
**
