by "Dean Rigdon" <rigdon@[EMAIL PROTECTED]
>
May 3, 2008 at 07:55 PM
Hey I replaced my ignition switch down on the steering column and it fixed
my problems. Runs like a new one! Thanks guys!
--
MonaVie ---- For Better Health and Better Wealth!
http://www.brighart.com
Coldwell Banker Tanner Realty
Making Real Estate Real Easy!
http://deanrigdon.homesandland.com
"Dean Rigdon" <rigdon@[EMAIL PROTECTED]
> wrote in message
news:fu38t2$9hv$1@[EMAIL PROTECTED]
>I got a 1991 Wrangler, 5speed, 4.0L. A couple times it died going down
the
>road. Later after wiggling wire and checking connectors it would crank.
>Today I cranked it and as it was idleing it shut down, but would crank
back
>up for a few times then shut down again after about a minute. When I
>switched it off and on a few times to read the code, the check engine
light
>would come on for a second and go off and not come back on until I
switched
>it off and on again. Then after about four times it wouldn't come on at
>all and at that time I quit hearing the fuel pump start up, but the gages
>still work. I noticed when the check engine light would come on it would
>crank and when it wouldn't light up it won't crank. Thanks in advance
for
>all your suggestions.
> Dean
>
> --
>
> MonaVie ---- For Better Health and Better Wealth!
> http://www.mymonavie.com/joycerigdon
>
> Coldwell Banker Tanner Realty
> Making Real Estate Real Easy!
> http://deanrigdon.homesandland.com
>