Fraser Johnston wrote:
> After a scary bit of brake lockup on the weekend I've changed the front
caliper
> on the passenger side for a rebuilt one, done the pads and changed the
flexi
> hoses on the FJ60 Landcruiser. Now the bastard of a thing won't bleed.
Spent
> most of the afternoon with a mate pumping the brakes and trying to get
them
> bleed but with the new hoses and the new caliper all the lines are full
of air.
> Any advice on how to get the air out?
>
pre-loosen the bleed and just pinch it , drop the plastic drain line you
brought into some clean fluid then pump the peddle slow and press HARD 3
times , have him loosen the bleed and hold the peddle to the floor
until nipped on the 3rd press, repeat several time until fluid flows ,
most toyos are the same >the smurf/lux it's an art
|
