by "Michael C" <mike@[EMAIL PROTECTED]
>
May 11, 2008 at 11:10 PM
"Trevor Wilson" <trevor@[EMAIL PROTECTED]
> wrote in message
news:68njnbF2u518tU1@[EMAIL PROTECTED]
> **I did use the 4" Bosch for a small cut. It took forever. 8mm steel
needs
> a lot more grunt than a 4" grinder. Still, I was only using the standard
> cut-off wheels. How thick are the "super thin" cutting wheels?
1.22mm according to the verniers. You might find it cuts better as it's
taking out a lot less material than the bigger grinder.
Michael
