Re: OT: Cutting steel (redux)

Trevor Wilson wrote:
>
>I purchased a couple of Flexovit disks (Aussie made) and they cut my
steel 
>perfectly and quickly. The cost of the Flexovit disks was $3.67 each. The

>cost of the Chinese disks was around $3.10 each.

That's those thieving hardware stores for you... they must've seen you
coming!  :)

Off the top of my head... trade suppliers charge around $2 for a 340mm
Flexovit cutoff wheel (whatever that is in inches), less than $1 for
120mm (probably the most common size).

However Pferd are vastly preferable in the smaller sizes (angle
grinder) and the ultra thin ones are the way to go (you'll need to
scroll down a bit)....  http://www.pferd.com.au/html_e/horse.htm

-- 
John H