Recently bought a used 1994 toyota 5spd 4x4 pickup with manual
hubs... I need either an owners manual or a faq or somebody to tell
me the ins and outs so I don't screw it up!
My assumptions are: you stop, put in neutral, go rotate the hubs from
free to locked, then ****ft from 2hi to 4LO or 4HI, and that reverse
applies when you want to get it back into 2wd. What if you want to
switch from 4HI to 4LO or vice versa.... do you do this on the fly, at
a stop I would asssume, but... hey I never had such a rig!
Any and all advice about the transmission operation and/or pointers to
faq's or online manuals would be most appreciated - there don't
happen to be any on ebay right now.
Thanks in advance
Peter
