Re: remote entry -key fob programming

>So, can anyone point me to the web page
>that has the process for 1999-2000 vehicle? (I'll do a little more
>searching, but my first pass did not turn up anything for my vehicle.)


When all else fails RTFM! The following info was found in teh Owner's
Manual fo rthe 2000 Caravan:

1. Turn ignition switch to the ON postion and leave vehicle in park.
2. Using a previously programmed transmitter, press the UNLOCK button
for 5 to 10 seconds. While the UNLOCK button is being pressed, press
the PANIC button and release bothbuttons simultaneously. You will hear
a chime sound to signal you that programming on the new transmitter(s)
may occur.
3. You may program up to 4 transmitters for your vehicle within a 30
second timed window. Press and release both LOCK and UNLOCK button of
a transmitter at the same time; then press any of the buttons once,
you will hear a beep when the transmitter has been successfully
programmed. A chime will sound when the 30 seconds is over, or if you
turn the ignition off.
4. You must repeat step 3 for all transmitters that will be used with
this vehicle (up to 4 total).

When it's not below freezing out in the garage I'll give the process a
whirl.

Oh, I did find a similar process on the web, but it did not include
the step to press both LOCK and UNLOCK buttons at the same time.


John Keith
kd0gd@[EMAIL PROTECTED]