Re: 99 RamVan blower resistor?

I've been looking under the hood but not sure what's there.  Doesn't 
look like anything in the firewall.  However, some device is bolted into 
the AC cover on the passenger side.  That might be it but Maacos 
replacement part had a resistor with a plastic angle bar attached to it. 
  I'm still confused.  There is a 4 pin connector on the AC mounted 
device which looks familiar.  Guess I'll take it out and look at it and 
maybe trace the wiring.







maxpower wrote:
> "Moses" <moses@[EMAIL PROTECTED]
> wrote in message
> news:47a3b48d$0$4951$4c368faf@[EMAIL PROTECTED]
> 
>>I have a 99 Ram Van 1500 3.9L.  The blower only runs on high speed so
>>I'm looking at replacing the motor resistor.  The Haynes manual says the
>>resistor in Dodge vans is behind the glove compartment.  Is this right
>>or wrong? I looked at two different resistors from the parts store and
>>none matched components behind the glove box.
> 
> 
> AHHH the infamous Haynes manual again!!! It has been awhile since I have
> worked on a B van.  I think the resistor on this vehicle is behind the
glove
> box meaning under the hood screwed into the firewall.If I remember
correctly
> the older B vans had the resistor located behind the glove box tray, you
had
> to open the box and pull out the tray. let me know where you found it.
> 
> Glenn Beasley
> Chrysler Tech
> 
>