Re: Need help identifying a black box.

"Daniel Who Wants to Know" <danielthechskid@[EMAIL PROTECTED]
> wrote in
message news:lUbrj.22216$9j6.8688@[EMAIL PROTECTED]
> I stated that I would start a new thread about the 95 GC SE that I
bought
> and here goes.  While inspecting the speakers in the liftgate (passenger
> rear was dead, broken wire)  I noticed a black box/module of some sort
> mounted near the bottom passenger corner (back passenger corner with the
> liftgate open) with a melted spot on it.  The interior lights don't turn
on
> when the liftgate is open and the rear washer/wiper is dead so I assume
it
> has something to do with either of those 2 functions.  Upon removing the
PCB
> from said module I noticed that a transistor has had a very bad day and
> completely disintegrated taking a section of the PCB with it.  The
module
> has 6 connector pins and the numbers on it are as follows (a google
search
> on them turned up nothing).  Thanks
>
> Front:
>
> Chrysler pentastar logo
>        4661297
>        93596 A
>    Made in Canada
>                        1
>
> Rear:
>
>      34 34
>
> I Believe what you are referring to is the rear wiper motor module, list
for
70$ at the dealer. Has nothing to do with the lifgate lites. The ground
tag
on the rear latch is more then likely rotted off causing the lites not to
work. if this vehicle hasn't had the latch replaced under the latch recall
you get the new switch on the latch.
  give me the last 8 of the vin# and I can check this out for you.

Glenn Beasley
Chrysler Tech