Re: 3.5L Code 25 - High RPM @ Idle

Everything looked good from a physical connection standpoint.  Is there a 
test procedure that can be performed with a simple DVM to verify the
wiring 
continuity?  Thanks.

  Bob


"Joe Pfeiffer" <pfeiffer@[EMAIL PROTECTED]
> wrote in message 
news:1bk5i05juw.fsf@[EMAIL PROTECTED]
> "Bob Shuman" <no_spam_thx@[EMAIL PROTECTED]
> writes:
>
>> My son's 1996 3.5L Eagle Vision TSI (92K miles) has started idling at 
>> ~1600
>> RPM (even when the engine is warm).  The check engine light is lit and 
>> the
>> on/off/on/off/on key trick displays a code 25, which appears to be 
>> related
>> to the AIS.
>>
>> I've cleaned the two throttle bodies and attempted to find any loose or
>> cracked vacuum lines, but they all appear to be fine.  At this point,
I'd
>> appreciate ideas on other possible causes and any troubleshooting 
>> procedures
>> that might be employed to try to isolate the problem.
>
> What did you find when you inspected the AIS motor and its wiring?
>