by "Jim Warman" <mechanic@[EMAIL PROTECTED]
>
Jan 22, 2008 at 05:18 AM
My best suggestion is to have the 4WD module polled for trouble codes...
Your shop will need a scanner capable of communicating with proprietary
modules....
Since "rebooting" the 4WD module seems to allow the system to work for a
short time, your concern would be with something that the module can't
"self
test" until the car is moving.... I might suggest removing and inspecting
the two transfer case speed sensors for any ferrous deposits on the
sensors.... But this is just a shot in the dark....
Also be aware that there are differences between Job ! and Job 2 Explorers
for that MY...
