Hello all,
Well, my baby has served me for nearly 2-years and 50,000 miles but
now I believe I may have screwed-the-pooch. My tranny had always been
iffy; it took a good 5-miles of driving in the morning in 2nd-gear
before it'd drop into the higher ones. Well, this weekend, I decided
against reason to add some tranny-fluid stabilizer. After about 150-
miles and on my way home from work, I noticed going up a hill at about
60, it wouldn't get out of whatever the second-to-last gear is;
revving at about 3000 RPM. I looked in my rear-view mirror and saw an
ominous blue cloud of smoke, and my rear window began glazing over
with oil. I figured I'd blown a seal, but wasn't all too sure if it
was engine or tranny oil. I got home, and had a restless night of
sleep, and this morning I hoped against hope that it was my engine-
oil. Realizing it was ATF, I started the engine, let it warm up, and
tried to put it in gear, which it did, but only VERY reluctantly. I
decided I was screwed indeed, and decided at a last resort to replace
the old fluid.
I've followed the advice posted here:
http://www.explorerforum.com/Singleton/web/pages/at1.html
SPECIFICALLY Greg J's, which is at the bottom of the page. I have
everything ready, and when I start the engine (in PARK), only about
half a quart of old ATF came out, and even though I'd siphoned new ATF
down the return tube, there is no suction. Advice anyone? I love this
truck and would hate to have to send her to the glue-factory.
-John
|
