Hello all,
I have 1995 XLT, manual transmission, 130,000 miles. My son took it to
work and everything was fine. When he went to leave work, it would not
start. It cranks fine, but will not start. I suspected it was a fuel
supply problem because I did not hear the fuel pump when I turned the
key to the on position. When I got it towed home, the tow truck driver
squirted some engin starter fluid in the intake and it started and ran
for a moment. This morning I pulled the KOEO codes and got a 542, fuel
pump circuit open-PCM to motor ground and a 113,IAT sensor circuit above
max voltage. I also tried grounding the fuel pump enable pin at the
data link connector, fuel pump does not run. I think I need to start
with the KOEO 542. Can some one elaborate on the description? Should I
be looking at the wiring between the fuel pump and it's grounding point?
Or could it be the fuel pump itself? Thanks.
Jay
|
