faust_151@[EMAIL PROTECTED]
wrote:
> On Feb 21, 9:27 pm, Michael Johnson <c...@[EMAIL PROTECTED]
> wrote:
>> scott and barb wrote:
>>> Yeah but will they work with TRW L2482 forged pistons?Assuming they
would
>>> work with L-2488's.
>> The OP stated stock pistons.
>>
>>
>>
>>> "Michael Johnson" <c...@[EMAIL PROTECTED]
> wrote in message
>>> news:kbidnbuxw5MkxSbanZ2dnUVZ_qrinZ2d@[EMAIL PROTECTED]
>>>> I have these heads on my car and they are pretty much a bold-on
>>>> modification. There is no need to change pistons etc.
>>>> faust_...@[EMAIL PROTECTED]
wrote:
>>>>> Cant find anything usefull on fordracing.com these days. This kit
>>>>> comes without roller lifters, with 1.7" roller rockers.
>>>>> First off, just curious if it will give significant gains on the low
>>>>> end. Throttle response, torque, etc. Will the high lift be too much
>>>>> for a smooth running street car?
>>>>> Standard length pushrods?
>>>>> Work with stock pistons for 89 GT ?
>>>>> Thanks for any info.
>>>
http://www.latemodelrestoration.com/iwwida.pvx?;item?item_no=LRS-6049...
>>> 20%20%201&comp=LRS
>>>>> If link doesnt work its under mustangparts\underhood\cylinderheads
>>>>> \topendkits
>>>>> found these guys through MM & FFs magazine.- Hide quoted text -
>> - Show quoted text -
>
> So after some research on the forums ive got my nearly final part list
> for this project, all this stuff is supposed to work together with
> stock pistons. Im wondering if there may be a clearance problem with
> the taller valve covers and the manifold.
I don't think standard size valve covers will conflict with that intake.
I suggest getting the valve springs tested because they can be off
even though the heads are new. Also, a little ****t/gasket matching
would be good and give a nice performance bump.
> GT40X top end kit:
> Kit Includes:
> Cobra Intake
> GT-40X Heads
> 1.7 Roller Rockers
> Valve Covers
> Timing Chain
> Head Bolts
> E Camshaft
> Gasket Kit
>
> Roller lifters FR
> 65mm throttle body BBK
> EGR plate 65mm Edelbrock
> 24lb fuel injectors Summit
> Mass Air Sensor 24lb 75mm Summit
> Adjustable Fule Pressure Reg BBK
> Fuel Pressure Gauge 1.5" Summit
>
> Any thoughts or insight to possible problems?
Get some new high performance push rods just to be safe.
|
