"WindsorFox" <darkshado666@[EMAIL PROTECTED]
> wrote in message
news:fr8pa1$vjq$1@[EMAIL PROTECTED]
> Brad and Karen wrote:
>
>> So, what do you guys think of getting replica wheels and them
potentially
>> sticking out 3/4"? Gay, or not gay?
>> Thank you.
>> Brad
>>
>
>
> 3/4" doesn't sound bad but if it's all 4 wheels and caused by the rims
> backset instead of overly wide tires I think IMHO it's going to look a
> little ghetto. I'd also worry about the tire rubbing the fender. I would
> either call and see if they can offer a set that would fit or I would be
> more inclined to go with the Weld rims that all the drag racers were
using
> at the time, if that will work.
inside fender rubbing while turning right or left
There are transition plates, I used to have for a set of racing slicks
were
about 1/2 inch, to correct offset some.
Round things with slots in them.
Wider tires look cool.
I thought 16" was stock.
It is hard to see 1/2 inch further out, probably could see an inch out.
2" is getto-gay for sure, 1" might sorta gay,
Jack the car up take off a tire and move it out to see
You should be able to see how it looks, and return it all if no good, they
may deal that way.
let us know what how it turns out.
|
