by Ashton Crusher <demi@[EMAIL PROTECTED]
>
Apr 6, 2008 at 06:36 PM
On Sun, 6 Apr 2008 17:28:34 -0700 (PDT), "Mark G7#9"
<markg9@[EMAIL PROTECTED]
> wrote:
>I had no problems with driver side plugs.
>Before I start on the passenger side, do I need to remove just the
>intake MAF hose or some other stuff???
>I read that the fuel rails just need to be loosened (which did work on
>the driver side OK, but it looks like there is a lot more crap on the
>other side.
>Thanks
>Mark
>2000 GT 'vert
I didn't loosen the fuel rail on my 99. I did disconnect one or two
of the injectors to get that out of the way. And I used some U-joints
on the socket and extension. There are a couple that are a tight fit
but doable.
