What year/engine is the car ?
90 mm seems too big, you could have stability problems, engine rpm
hunting,
etc
I have 24lb injectors with a 75 mm and got it tuned.
If a 5.0, no need to bother with cold air, it already is.
<faust_151@[EMAIL PROTECTED]
> wrote in message
news:a2e9bc6c-5223-449c-a334-d8dbc2cc8e70@[EMAIL PROTECTED]
> Ive sent to summitracing but wont hear back till next week. Someone
> must know this.
>
> In the middle of a project, Ive got a BBK #1557 cold air kit sitting
> on the floor, because of situation change I need to upgrade my fuel
> injectors and MAF. The BBK site says this cold air kit wont fit
> aftermarket MAFs. The summit site says that the Granatelli MAF is 90mm
> and will require mods to the air tube, but suggested part is the same
> BBK cold air kit. And the Granatelli site says the MAF is a stock OEM
> replacement whether its 19lb or 24lb calibrated.
>
> So who is telling the truth? If I get 24lb injectors, matching
> Granatelli MAF, will it fit my BBK cold air kit that I already have?
>
> Thanks,
|
