Re: Tegger's 'Teg needs a cat - UPDATE

Theres a big Walker 'W' on my OEM muffler for my 98 civic.....

On May 20, 5:28 pm, Tegger <teg...@[EMAIL PROTECTED]
> wrote:
> "Elle" <honda.lion...@[EMAIL PROTECTED]
> wrote in news:tXhXj.37$GV3.11
> @[EMAIL PROTECTED]
>
>
>
> > "Tegger" <teg...@[EMAIL PROTECTED]
> wrote
> >> Click here to see those holes:
> >>http://www.tegger.com/hondafaq/misc/catrust/cat-rust-1.jpg
> >>http://www.tegger.com/hondafaq/misc/catrust/cat-rust-2.jpg
>
> > Great photos. Whoa, re those holes. I will check my 91
> > Civic's catalytic converter (204k miles; about half its life
> > driven in northern U.S.) soon.
>
> >> I'm going to a muffler shop this morning to see if it's
> >> possible to weld up
> >> the holes so I can get a few more months out of the cat.
>
> > And during this time, are you going to keep shopping around
> > for something more permanent?
>
> Update: Can't be welded. The metal's so thin the muffler shop says
they'd
> just blow holes in it if they tried.
>
> The holes are actually fairly small, about 1/8" - 3/16" in diameter. The
> noise is mostly coming from the slits at the rear, which are about the
same
> overall size.
>
> I will be replacing the cat (and front pipe, whose flange is rotted to
> paper-thinness) next month or so. What's going on is a Walker or other
> ****y aftermarket. It looks like there's just barely enough room for
the
> fatter aftermarket unit to fit.
>
> Until then, I'm wondering if some JB Weld and aluminum tape might not
quiet
> things down until I get around to doing the work. Ordinarily I'd just go
> ahead and do it, but things have been busy around here so I haven't had
a
> chance.
>
> --
> Tegger
>
> The Unofficial Honda/Acura FAQwww.tegger.com/hondafaq/