In article <EE3sj.19692$Ly.2871@[EMAIL PROTECTED]
>, Greg <greglc84@[EMAIL PROTECTED]
>
wrote:
#and one phillips screw. Drain on radiator is a peice of @[EMAIL PROTECTED]
spray
entire
#contents on every nut, bolt, engine, axle, steering, everywhere except
into
#bucket. Heater core and ducts go back in way easier then they come out,
The drain is set right above a rod (fergot which one) so that you need to
have a hose stuck on to the end of the drain nut to get your coolant to go
where you need it to go. I used to use a length of clear tubing from home
depot.
/herb
|
