nrs wrote:
> I recently had a starter rebuilt and now that it is installed, it does
> not work very well. It did not have any ****ms originally and it was
> re-installed the same way. Sometimes it does not engage the flywheel
> and when it does, it makes rumbling sounds. Also, it makes a scraping
> sound sometimes, both when it fails to engage and sometimes when it
> does engage. What could cause it to make scraping sounds? Thanks in
> advance.
That sounds like the bu****ng in the nose didn't get replaced or you were
too late and your flywheel ring gear is ground down...
You need to pull the starter to see if it's the bu****ng or gear.
A bad connection on the main cables going to the starter can also not
pass enough power to kick it into the flywheel ring gear.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
'New' frame in the works for '08. Some Canadian Bush Trip and Build
Photos: http://mikeromainjeeptrips.shutterfly.com
|
