On Mar 11, 3:03=A0pm, nrs <neale...@[EMAIL PROTECTED]
> wrote:
> I recently had a starter rebuilt and now that it is installed, it does
> not work very well. =A0It did not have any ****ms originally and it was
> re-installed the same way. Sometimes it does not engage the flywheel
> and when it does, it makes rumbling sounds. =A0Also, it makes a scraping
> sound sometimes, both when it fails to engage and sometimes when it
> does engage. =A0What could cause it to make scraping sounds? =A0Thanks
in
> advance.
It turned out to be a faulty drive lever. This is what pushes the
drive gear to the flywheel ring gear when the solenoid is energized.
Thanks for your help.
|
