Re: '88 Grand Wagon brake job

I went to NAPA today and bought all my parts. The Jeep is chocked and up on

jack stands and the first wheel is off. I took the new drum and tried to 
slip it on just to see if it fit, and it won't go on. I compared it to the

old one and it looks the same, but it won't clear the old shoes. I hope
it's 
because the old drum was probably machined and the old shoes were adjusted

to fit the larger bore of the old drum. I sprayed brake cleaner over 
everything real good and I hit the nuts that hold on the cylinder with wd 
40. I will begin the project soon. There was no evidence of brake fluid on

the old parts. I'm wondering if I really need to bother with changing out 
the brake cylinder? I hope I can get help from the group when needed.