by "DougW" <I.only.read.usenet@[EMAIL PROTECTED]
>
Apr 14, 2008 at 09:15 PM
paul wrote:
> Weird question here.
> 93 YJ I6 auto
> Looking at the transmission skid/ sup****t plate lying on your back
> with your head towards the front of the vehicle.
> There are 2 nuts that are attached to the actual bracket that is
> connected to the bottom of the transmission.
> To the right of these two nuts is a threaded rod (with a nut on the
> bottom and top of it) that goes through the skid plate and up into a
> rubber piece which, if you squint and use your imagination, kinda
> looks like a 'kong' dog chew toy, there are also some spacers /
> washers on this assembly.
> This threaded rod and 'kong' assembly is loose - should it be tight?
> What is it's function?
Not for sure, but on the ZJ there is a post on the transmission mount
that sup****ts the exhaust system.
http://revbeergoggles.com/motormount/
Pics of the mount replacement.
--
-- DougW -- 93 ZJ 4.0 http://revbeergoggles.com
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
