see there is the problem. I can get the lever back one position, but it is
way too easy to fall back into s wheel. If I hit a bump I know it will
dis-
engage. Anything other than that, it won't do it. I have tried with the
truck
in neutral as well. Still a no go.
I have no idea what to do about this one.
noneofyourbusiness wrote:
>>I did the swap. Other than a little weird whining noise, everything
seems ok.
>>
>[quoted text clipped - 3 lines]
>>break anything...
>>other than that, she runs and it's fine
>
>[snip]
>
>Whining is "fine"?
>
>Anyway, ignoring the labels from your old setup, all the way forward
>is of course 2wd high. Pulling straight back engages 4wd high. Putting
>the tranny in neutral, and then pulling the lever to the right and
>back should get you 4wd low.
>
>This, of course, assumes that I know what I'm typing about ;-)
>
>...
--
Message posted via CarKB.com
http://www.carkb.com/Uwe/Forums.aspx/jeep-cars/200804/1
|
