Both bulbs work. I tested them with a bench top 12 volt power supply.
Even took the bulb from the drivers side and plugged it in on the
passengers side and vice versa.
The bulbs are brand new Hella.
I just tried with another fresh unopened pack of Bosch/Osram bulbs
this morning. Same thing happens-Drivers side Day time running lights
and low beam does not work.
As yes Mike, I am aware that the Day time running lights and low beam
are one of the same circuits.
That's why I am wondering if the low beam (Although I typed out high
beam) relay is at fault.
Thanks guys
Ryan
On Tue, 29 Apr 2008 09:22:11 -0400, Mike Romain <romainm@[EMAIL PROTECTED]
>
wrote:
>That indicates you have a burned out high beam filament.
>
>The daytime lights are the high beam on half power.
>
>Mike
>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>'New' frame in the works for '08. Some Canadian Bush Trip and Build
>Photos: http://mikeromainjeeptrips.shutterfly.com
>
>
>Socks wrote:
>> Good day,
>>
>> My wife and I own a 2004 Liberty with a headlight problem.
>> The drivers side Day time running light/high beam does not work.
>> When I turn the head light switch to the low beam setting both drivers
>> and passengers head lights work. When I pull back on the turn signal
>> stalk to flash the high beams only the passenger side lights up. Then,
>> when I switch the high beams on, the same thing. Only the passenger
>> side lights up.
>> Both head light bulbs work. So that's not the problem. All the fuses
>> check out as well.
>> I have replaced the Day time running light relay but that is also not
>> the problem.
>> Could the high beam relay be partially defective? If so, where do I
>> find it?
>> I imagine that it is in the power distribution box under the hood. Yet
>> when I open it I am unsure as to which relay it is.
>> (As I am a disabled person, I don't have the funds to purchase a full
>> service manual until the end of May... So I figured I would ask here
>> and see if any of you guys might have some insight into this problem.)
>>
>> Thank you
>>
>> Ry'


|