> My rear pinion points upwards, in line with the driveshaft.
This would be correct if you have a SYE kit installed and a rear
driveshaft
with a CV joint.
Also the output shafts of the transfer case, are not parallel to the
ground.
The Engine / Transmission / TC combo, is tilted to the back.
When you lower the TC, or when you lift the engine, this angle is
increased,
so that it matches that of the rear pinion (non SYE transfer cases).
Regards,
Bill Spiliotopoulos.
'96 XJ,
'06 TJ.
|
