Re: Weird Question...

"Chuck" <Chuckk2nospam@[EMAIL PROTECTED]
> wrote:

> I really don't know what the tonneau screws screw into. 

It screws into holes already provided in the dashboard.  You lift out 
the factory installed plastic pins that hide the holes when you install 
the screws for the tonneau.

> Is this a hard or soft cover?

Soft.  http://www.gomiata.com/robheadpocto.html

> It may be possible to remove the glove compartment bib and see if
> there is anything that you might add to help with the situation.

My question is can I reach my hand in there with the glove box removed?  
If someone has already done this it could save me time.

> It may be that epoxy will be your best bet.

HERESY!  Cars are fixed with either duct tape or baling wire, a true 
purist won't use any thing else!  Except JB Weld, of course.....

*IF* I can reach the end of the stud from underneath, I can add a 
reinforcement somehow, if not, I'll use JB Weld to "glue" the stud in 
place but I don't have a lot of hope for that being a permanent fix, 
the area of the dash is pretty well damaged when the vandals ripped off 
the tonneau w/o unsnapping it.




-- 
XS11E, Killing all posts from Google Groups
The Usenet Improvement Project:
http://improve-usenet.org