Re: Pads/rotors

In article <juOdnayOipBcsLXVnZ2dnUVZ_rXinZ2d@[EMAIL PROTECTED]
>,
 "miker" <miker4butnospamok@[EMAIL PROTECTED]
> wrote:

> > That was exactly what I was getting at. I think a piston/pad spreader
(an
> "X" of
> > aluminum, about nine inches long, with a hand-turned bolt for
spreading)
> may be
> > the most worthwhile single purpose tool I've ever owned.
> 
> Good idea, I'll have to make one of those. On bikes I've always been
able to
> just put a chunk of aluminum over the piston and squeeze it in by hand,
I
> assume cars are harder.

Remember that on the rear, you'll need to back off the adjuster first.

-- 
Lanny Chambers
St. Louis, MO
'94C