by Stan Weiss <srweiss@[EMAIL PROTECTED]
>
May 16, 2007 at 11:30 PM
Eugene Blanchard wrote:
>
> Your tunnel ram and cam provide the peak
> performance at high rpm probably around 6500 - 7000 rpm. You want to
****ft
> up just below that range at the peak of the torque curve.
I reread this and still do not understand ****fting at the peak of the
torque curve. You want to ****ft after the HP peak which will be above
the peak of the torque curve.
Stan
http://users.erols.com/srweiss/index.html#jcalc
