Keith wrote:
> "lazza" <marklamb1@[EMAIL PROTECTED]
> wrote in message
> news:1140903612.254073.8770@[EMAIL PROTECTED]
> >I have a Japanese FD3S 1994. The dipstick is showing the sump is full.
> > When the engine is cold, the oil pressure is normal. As the engine
> > warms up the pressure drops a little as you would expect. My problem
> > is that I can see the pressure dropping off every now and again when
> > the engine is hot (not too hot, just normal running temp), sometimes
> > almost to zero at tick over. I am thinking it might be the oil
> > pressure relief valve sticking open. It is overdue an oil change, but
I
> > do not expect this symptom from an overdue oil change. I would like
to
> > get hold of some references on the rotary so I can do my own maint
> > Any ideas.
> >
> Change the oil first, using the correct viscosity and see what happens
after
> that.
> The oil can get very thin if overdue, used to happen in an non-turbo13B
I
> had..
>
> Keith
|
