by Steve B. <none@[EMAIL PROTECTED]
>
May 9, 2008 at 06:42 PM
On Fri, 09 May 2008 14:25:18 GMT, Calab <myspam@[EMAIL PROTECTED]
> wrote:
>I have an eight gallon air compressor... 4.3cfm @[EMAIL PROTECTED]
40psi and 3.5cfm @[EMAIL PROTECTED]
>90psi.
>
You don't have enough compressor for an air powered one. I've got a
40 gal unit with a direct drive compressor.. basically not a cheapie
but still cheap. I spend more time waiting for air than I do using
the tools. I would be looking at the electric with that small of a
compressor.
Also realize there is a big difference in specs for low and high end
tools. High end tools have a decent chance of meeting the specs they
claim and do it on a consistent basis. With the cheapies one test
model might have come close to those specs once in the test lab when
they launched it at the bolt using a linebacker and a potato gun.
Steve B.
