Re: HELP: ****sche 944 no spark

On May 13, 9:50 am, N8N <njna...@[EMAIL PROTECTED]
> wrote:
> Could be any of these, but I would try the DME relay first, this is
> the classic failure of these vehicles.  I had a similar failure on my
> '88 and it ended up being a combination of bad coil and poor solder
> joints in the DME (likely caused by the bad coil overheating the coil
> driver) but if you are confident in your diagnosis of the coil as
> being good try the DME relay.  You can bypass it tem****arily, look for
> a procedure on Clark's Garage.


Yes, but if there is 12V at the coil, should it be sparking?  there is
12V at the terminals on the coil, the impedances are correct, but we
aren't getting any spark.